Split System Installation Balwyn

Split System Installation in Balwyn

There’s nothing more satisfying than coming to your home on a hot day and flipping on your split-system air conditioning and in just a couple of minutes , your home and your family is cool.

Split system air conditioning offers this flexibility, which makes them difficult to beat. Like all heaters and coolers, to ensure they are operating to their maximum it is essential to have them serviced and maintained in a professional manner by skilled professionals. Melbourne Ducted Gas Heating offers experienced technicians who are familiar with split system air conditioners from top to bottom. They specialise in all makes and models of these units offering you peace of mind that we will finish the job at a professional level.

We offer a wide range of services that include the following:

• Split System Installation Balwyn
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are fully qualified and licensed to complete all types of tasks. If you’re looking for [keywords lower] Balwyn services then contact Local Heating and Cooling Professionals Balwyn today and talk with one of our helpful team members.

How Do Split Systems Work?

Air conditioning splits get their name due to half it (condenser) is located outside of the home, while the other portion (fan coil) is installed inside. When it cools, warm air inside the room is absorbed from the fan coil and taken out, resulting into cool air flowing back into the house. In reverse mode, it allows the heat pump to operate in reverse to provide heating in cold weather.

The split system of air conditioning can be installed in individual rooms, areas , or rooms linked by copper pipe into an outdoor unit (condenser). Systems with multi-head splits can be set up for at least nine rooms with just one outdoor unit permitting an individual temperature control for each room.

What Are The Running Costs For Split Systems?

One of the top brands for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating during the winter and summer periods The annual operating cost would be $272.34.

Reducing the Split System Running Costs

It’s easy to save on running expenses with a Split System. Depending on the model you buy, as well as its star rating will determine how much you can save annually. Beyond the initial price to how you use your Split System can help as well.

Tips For Using A Split System

• Set the thermostat between 24C and 26C to cool. Any degree lower than that increases the running cost by around 10%.
• Make use of the economy setting If your split system comes with one. Also, you should regularly check the condition of your air cooling system.
• Keep the sun’s heat away by closing curtains and blinds in the morning. Close windows and doors to areas that are cooling when the split system is on.
• When the split system has been turned off and the cooler is outside, it is recommended to open the doors along with windows, allowing cool air in.
• Insulate your residence to prevent the heat out in summer and inside in winter.
• Dress according to the weather conditions.

Why Choose A Split System?

Air conditioning units mounted in wall are the most widely owned residential air conditioning system since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year because it maintains the temperature constant, cuts costs (less energy consumption) and produces a lesser amount of sound when it is employed. This is accomplished by setting the speed of rotation more precisely.

Affordable

Wall-mounted Split AC system are best cost-effective option for a single room, apartment or small house because they are relatively inexpensive to buy (depending on how many indoor units you’ll need) and there is no requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the room that it is installed within, and each space may have different temperature.

Air Quality

Many Split air conditioners include air filtering and humidity control functions which control the amount dust and humidity that can be found in the space. This provides those with sensitive skin (children or elderly, asthmatic or allergic consumers) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser which in turn gives you the peace of mind that you have the best AC (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Is a split system the same as the air conditioning?

Absolutely, Split System is an air conditioning system. However, there are different kinds of air conditioning systems. These includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

Each of these systems operates with refrigerant and electricity under the same principle but they are different in terms of how they are installed.

What is the time frame to install a split system air conditioner?

Generally speaking for a single split-system air conditioner installation will be completed in 3-6 hours. The exact length of time will depend on many factors such as below:

• Location and size of both outdoor and indoor unit
• The route of copper pipes between indoor and outdoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In the majority cases in the event that your air conditioner is over > 10 years old and you notice evident issues with the A/C there’s a good chance that it’s cheaper to replace rather than fix.

In order to help you make the right decision, it is best to speak with the team at ComfyHome to give you an honest opinion on the state of your air conditioner.

What size of split system air conditioning will I require?

A typical measure ratio would be to multiply the size of the room by a factor of 0.15 to get the needed power of the measurement unit in kilowatts.

For a room with a size of 40 square metres, you’ll have a Split system air conditioning unit that is 6 kW. An air conditioning unit of 2.5kW is ideal for 10-20 square meter room areas.

However, the amount of the Split system air conditioning required can be dependent on other factors such as the room insulation, quantity of residents and’ locations.

To get an accurate estimate of the needed Split Unit size we recommend you call us for a more detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general, an air conditioner is built to last from 10-20 years in the an average. But this depends on a lot of elements, such as the model of the AC and the quality of the installation, the routine maintenance history etc…

It is essential to service your split system air conditioner on a regular basis for a longer life span and to increase effectiveness.

When should I wash my air conditioner air filter?

Based on Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every two weeks to improve the system’s efficiency and potentially reduce your energy usage by 5 to 15 percentage.

Balwyn Gas Heating Services

• Gas Hot Water System Installation & Repairs Balwyn
• Carbon Monoxide Testing Balwyn
• Balwyn
• Ducted Gas Heating Servicing & Repair Balwyn
• Gas Space Heater Repair Balwyn
• Gas Log Fire Service & Repairs Balwyn
• Evaporative Cooling Repair Balwyn
• Gas Appliance Servicing & Repair Balwyn
• Braemar Ducted Gas Heating Servicing & Repair Balwyn
• Gas Heating Balwyn
• Gas Heating Installation Balwyn
• Gas Heating Service Balwyn
• Gas Heating Repairs Balwyn
• Vulcan Ducted Gas Heating Servicing & Repair Balwyn
• Brivis Ducted Gas Heating Servicing & Repair Balwyn

What Types of Systems We Service & Repair

Each model and brand of heating requires its own maintenance and operation; our experienced technicians are knowledgeable and experience to offer first rate services to all systems of heating for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in repairs and maintenance of heating systems and specialize in all types and brands of heating equipment. We take pride in a rapid response time and dedication to excellence, efficiency , and reliability.

We can service and maintain the top brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Request a Quote with No Costs

Our Promise To You

At Melbourne Ducted Gas Heating we understand the discomfort of not having hot water, and it’s something we do not believe anyone should have to experience. That’s why we give top priority for hot water emergencies. All of our plumbers are courteous and reliable, without a doubt we will be able to help with any emergency.

We are proud of our customer service , and it is our conviction that the little things matter the most.

We are proud of our outstanding customer service. and here’s the reason our customers appreciate us:

• We always show up when tell you we will.
• Our experts will give you an appointment when they are thirty minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always taking care to clean up after us.

We at Melbourne Ducted Gas Heating offer emergency and maintenance services in electrical, plumbing and heating. If you have some questions about our services, and the services we provide, we are here to help.