Split System Installation Skye

Split System Installation in Skye

There’s nothing better than coming home on a hot day of 40 degrees and flipping on your split-system air conditioning and in just a couple of minutes , your home and your family will be cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. But , just like all heaters or coolers to keep them running at their best, they need to be serviced and maintained to the highest standard by qualified experts. Melbourne Ducted Gas Heating offers experienced technicians who know your split system air conditioners inside and out. They specialize in all brands and models providing you with assurance that we will finish the job in a professional manner.

We provide a variety of different Split System Installation services which include the following:

• Split System Installation Skye
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals is licensed and qualified for all sorts of tasks. If you are looking for split system installation Skye services then contact Local Heating and Cooling Professionals Skye today and talk with one of our helpful team members.

How Do Split Systems Work?

Air conditioning splits are their name because of half it (condenser) located outside the house , while the other part (fan coil) is located inside. When it cools, warm air inside the room is absorbed through the fan coil, and then eliminated, resulting in cooling air returning to the house. While reverse cycle allows for the heat pump to run in reverse, providing heating during cold days.

Systems for split air conditioners can be installed in individual rooms, areas or multiple rooms linked by copper pipe with an outside unit (condenser). Multi-head split air conditioning systems can be used for as many as nine rooms and only one outdoor unit, as well as allowing separate temperature control for each room.

What Are The Running Costs For Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. If you are looking for a Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular heating & cooling during the summer and winter months The annual operating cost would be measured at $272.34.

Lowering Split System Running Costs

It’s not difficult to lower your running expenses with a Split System. The model you buy, as well as its star rating will determine just how much you can save annually. However looking beyond the initial cost to the way you will use the Split System can help as well.

Guide to Operating A Split System

• Set the thermostat to 24C and 26C to allow for cooling. Every degree lower in summer will raise the cost of running by around 10%.
• Utilize the economy setting in the event that your split system is equipped with one. Also, you should regularly check the condition of your air cooling system.
• Keep the sun’s heat away by closing curtains as well as external blinds during the day. Close all doors and windows in areas that are cooled when it is split running.
• When the split system has been switched off , and the cooler outside, you can open doors and windows to let cool air circulate.
• Insulate your home to keep summer heat out and the cold inside during winter.
• Dress to suit the weather conditions.

Why Select A Split System?

Air conditioning units mounted in wall are the most widely used residential air conditioning system because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year since it keeps a constant temperature, saves costs (less consumption of energy) and produces relatively less sound when it is utilized. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall mounted divided AC systems are the most affordable option for a one room or apartment since they are inexpensive to purchase (depending on how many indoor units you require) and there is no installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is installed in, thus each room can have a distinct temperature.

Air Quality

Many AC splits come with air filtering and humidity control functions which control the amount dust and humidity inside a room. This can provide those with sensitive conditions (children or elderly, asthmatic or allergic users) an unwinding mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser that in turn provides you with the comfort of having the most suitable Air conditioner (in terms of output and physical limitations) to a specific space.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

It is true that Split System can be described as an air conditioner system. However, there are different types of air conditioning system that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate with refrigerant and electricity under the same principle, but are different in terms.

How long will it take to set up a split system air conditioner?

In general the typical split-system air conditioner installation can last between 3 and 6 hours. But, the exact amount of time will depend on a variety of factors, such as below:

• Location and size of both indoor and outdoor unit
• The copper pipes are routed between indoor and outdoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Do I need to replace or fix my cooling system?

In the majority of situations when your air conditioner is over > 10 years of age and has noticeable issues with your A/C, there is a good chance that it could be cheaper to replace then repair.

In order to help you make the best decision It is recommended to talk to the experts at ComfyHome for an honest and accurate assessment of the condition of your air conditioner.

What size split system air conditioning do I need?

A typical measurements ratio is multiple the room area by a factor of 0.15 to get the needed power of the device in kilowatts.

For a room with a size of 40sqm, you should require a split system air conditioning unit that is 6 kW. A unit that can cool the air at 2.5kW is ideal for 10-20 square meter room spaces.

The size of the Split system’s air conditioning will also be dependent on other factors such as the insulation in the room, the size of the room, and’ location.

For an accurate assessment of the necessary Split dimension, we suggest that you contact us for a comprehensive analysis.

More Split System FAQ's

What is the longest a split system air conditioner last?

In general an air conditioner is built to last from 10-20 years on average. However, it is contingent on a variety of factors such as the brand of the A/C as well as the quality of the installation, regular service history, etc…

It is important to service Your Split System AC frequently for a longer life span and to increase efficiency.

When should I wash the air conditioner’s air filter?

According to Daikin Australia, it is strongly recommended that you clean your air conditioning filters every 2 weeks to increase the system’s efficiency and potentially decrease your energy use by 5 to 15 percentage.

Skye Gas Heating Services

• Carbon Monoxide Testing Skye
• Brivis Ducted Gas Heating Servicing & Repair Skye
• Gas Appliance Servicing & Repair Skye
• Skye
• Evaporative Cooling Repair Skye
• Vulcan Ducted Gas Heating Servicing & Repair Skye
• Gas Heating Service Skye
• Gas Space Heater Repair Skye
• Gas Heating Installation Skye
• Gas Heating Repairs Skye
• Gas Hot Water System Installation & Repairs Skye
• Braemar Ducted Gas Heating Servicing & Repair Skye
• Gas Log Fire Service & Repairs Skye
• Gas Heating Skye
• Ducted Gas Heating Servicing & Repair Skye

What Types of Systems We Service & Repair

Each brand and style of heating system has its own maintenance and operation; our experienced technicians are equipped with the expertise and expertise to provide the best service to all systems of heating, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in heating repairs and maintenance with a focus on all models and brands of heating equipment. We pride ourselves on a fast response time and dedication to excellence, efficiency and reliability.

We are able to service and maintain the major brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re friendly and personable.
• Professionally trained and licensed team
• Get a Quote With No Costs

Our Promise To You

We at Melbourne Ducted Gas Heating we understand the difficulty of not having hot water. This is something we don’t think anyone should suffer through. This is why we place an emphasis on emergencies involving hot water. Our plumbers are friendly and trustworthy and without doubt, we can assist you in any situation.

We pride ourselves on our customer service , and it is our belief that the tiny things are the most important.

We take pride in our excellent customer service. this is why our customers love us:

• We always show up when declare that we will.
• Our technicians will give you their number when they’re thirty minutes away.
• Upfront competitive pricing and advice prior to the start of the project.
• Always cleaning up after us.

The staff at Melbourne Ducted Gas Heating offer emergency and maintenance services in electrical, plumbing and heating. If at any time you have some questions about our services and the products we provide, we are here to help.