Split System Installation Kew

Split System Install in Kew

There’s nothing more enjoyable than coming home on a hot day and switching on your split system air conditioning and in just a couple of seconds, the house and your family is cool.

Split system air conditioning provides such the ability to be used in a variety of ways, making them difficult to beat. However, like all heaters and coolers to make sure they’re running optimally they should be maintained and serviced to a high standard by skilled professionals. Melbourne Ducted Gas Heating offers experienced technicians who know split system air-conditioners from top to bottom. They specialize in all models and models giving you the confidence that we will finish the job to professional standards.

We offer a variety of different Split System Installation services which include the following:

• Split System Installation Kew
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed to handle all kinds of tasks. If you’re searching for split system installation in Kew services then contact Local Heating and Cooling Professionals Kew today and talk with one of our helpful team members.

How Do Split Systems Function?

The split systems of air conditioning are the name because of one half of it (condenser) is located outside of the home, while the other half (fan coil) is installed inside. When it cools, warm air from inside the room is drawn in from the fan coil and taken out, resulting into cool air recirculating back into the house. While reverse cycle allows for heating pumps to run in reverse to provide heating on cold winter days.

The split system of air conditioning can be installed in individual rooms, areas or even multiple rooms connected by copper piping into an outdoor unit (condenser). Multiple-headed split-air conditioning units can be set up in more than nine rooms and just one outdoor unit as well as allowing the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of the top brands that we recommend for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the winter and summer periods The annual running expense would be $272.34.

Reduced split system Operating Costs

It’s easy to lower your running expenses with a Split System. The model you buy, as well as its star rating will determine how much you’ll save per year. But looking beyond the initial cost to the way you utilize Your Split System can help as well.

Tips For Using Split Systems

• Set the thermostat between 24C and 26C to cool. Any degree lower than that will increase your running costs by 10%..
• Make use of the economy setting If your split system comes with one and regularly service your air cooling system.
• Make sure that the sun’s heat is kept out by closing the curtains and exterior blinds during the day. Close doors and windows to areas that are cooling when your split systems are operating.
• When the split system has been turned off and the cooler is outside, open the doors and windows to let the cool air in.
• Insulate your house to block warm summer days out and cool inside during winter.
• Dress according to the weather conditions.

Why Choose A Split System?

Air conditioning units mounted in wall are the most commonly used air conditioning systems for homes, as they are affordable and simple to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through all seasons since it ensures a constant temperature, saves costs (less consumption of energy) and generates less sound when it is employed. This is achieved by controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted split AC models are best economical option for a single room apartment or small house as they are relatively cheap to buy (depending on the amount of indoor units you’ll need) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit is able to control the area it is situated within, and each space can have a different temperatures.

Air Quality

A lot of Split air conditioners feature air filtering and humidity control functions that control the amount of dust and humidity inside the space. This gives sensitive customers (children and elderly, asthmatic or allergic customers) an unwinding mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to be connected to one outdoor condenser, which gives you the comfort of having the perfect air conditioner (in terms of output and physical limitations) for the room you are in.

Split System FAQ

Is a split system the same as the air conditioning?

It is true that Split System has an air-conditioning system. However, there are different kinds of air conditioning systems. These includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each of these systems operates using refrigerant and electricity, based on the same principle but they are different in term of installation.

How long will it take to set up a split system air conditioner?

In general the typical split system air conditioning installation should last between 3 and 6 hours. The exact length of time could vary based on various factors like the following:

• Location and size of both indoor and outdoor unit
• Copper pipes that are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Do I need to replace or fix my AC unit?

In most situation when your air conditioner is more than 10 years old and you have obvious issues with your AC There is a high chance that it could be cheaper to replace rather than fix.

To assist you in making the best decision To make the right choice, speak with the team at ComfyHome to give you an honest evaluation of the state of your air conditioner.

What size of split system air conditioner do I need?

A common measurement ratio is to multiply the area of the room by a ratio of 0.15 to get the needed power of the measurement unit in kilowatts.

For a room area that is 40 sqm, you’ll need a Split system air conditioning unit that is 6 kW. An air conditioning unit of 2.5kW is ideal for 10-20 square meter room areas.

The size of the Split system’s air conditioning can be affected by other factors like the room insulation, quantity of residents and’ location.

To get an accurate estimate of the necessary Split Unit size please contact us for a comprehensive analysis.

More Split System FAQ's

How long will a split system air conditioner last?

In general an air conditioner is designed to last between 10 and 20 years on an average. But this depends on a lot of elements, such as the brand of the A/C as well as the quality of the installation, routine service history and so on…

It is vital to check the maintenance of Your Split System AC often to extend its life and increase effectiveness.

How often should I clean my air conditioner air filter?

Based on Daikin Australia, it is strongly recommended to take care to clean your air conditioning filter every two weeks in order to boost the system’s efficiency and potentially decrease your energy use by 5 to 15%.

Kew Gas Heating Services

• Brivis Ducted Gas Heating Servicing & Repair Kew
• Gas Space Heater Repair Kew
• Evaporative Cooling Repair Kew
• Ducted Gas Heating Servicing & Repair Kew
• Gas Heating Installation Kew
• Braemar Ducted Gas Heating Servicing & Repair Kew
• Gas Hot Water System Installation & Repairs Kew
• Gas Log Fire Service & Repairs Kew
• Gas Heating Kew
• Kew
• Gas Heating Repairs Kew
• Gas Heating Service Kew
• Vulcan Ducted Gas Heating Servicing & Repair Kew
• Carbon Monoxide Testing Kew
• Gas Appliance Servicing & Repair Kew

What Types of Systems We Service & Repair

Every brand and type of heating has it’s specific operation and maintenance needs; our experienced technicians are knowledgeable and know how to provide top-quality services on all types of heating equipment which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in the field of heating repairs and maintenance with a focus on all models and brands of heating systems. We pride ourselves on having a fast response time and dedication to excellence, efficiency , and reliability.

We service and maintain the leading brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Great Reviews & Reputation
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Request a Quote with No obligation

Our Promise To You

We at Melbourne Ducted Gas Heating we understand the discomfort of not having hot water, and it’s something we believe no one should suffer through. This is why we put the highest priority on emergencies with hot water. Our plumbers are reliable and friendly Without a doubt, we can assist you in any circumstance.

We pride ourselves on our service to customers and it is our firm belief that the small things count the most.

We are proud of our great customer service, and here’s the reason our customers love us:

• We always arrive when we promise to be there.
• Our techs will give you a the number to call them when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we start the job.
• Always getting our hands clean after ourselves.

At Melbourne Ducted Gas Heating offer emergency and maintenance services for electrical, plumbing and heating. If you are unsure about our services, and the services we can offer, please contact us.