Split System Installation St Kilda

Split System Install in St Kilda

There’s nothing more satisfying than coming home on a hot 40 degree day activating your split system air conditioning, and in a matter of minutes the house and your family is cool.

Split system air-conditioning provides this versatility, which makes them tough to beat. However, like all heaters and coolers to keep them running at their best they must be checked and maintained to the highest standard by experienced professionals. Melbourne Ducted Gas Heating offers experienced technicians who know split system air-conditioners from top to bottom. They specialize in all models and models of these units giving you the assurance that we are able to complete the task to a professional standard.

We offer a wide range of services that comprise the following:

• Split System Installation St Kilda
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are fully qualified and licensed for all sorts of work. If you’re looking for split system installation in St Kilda services then contact Local Heating and Cooling Professionals St Kilda today and talk with one of our helpful team members.

How Do Split Systems Work?

Split air conditioning systems are their name because of half the system (condenser) located outside the house while the other part (fan coil) is inside. In cooling, warm air in the room is brought in by the fan coil, and then is then removed, which results in cooling air returning to the house. The reverse cycle permits the heat pump to operate in reverse to provide heat during colder days.

Systems for split air conditioners are installed in individual rooms, zones or rooms that are connected via copper pipes with an outside unit (condenser). Multiple-headed split-air conditioning units can be installed in as many as nine rooms and only one outdoor unit and allowing for the control of temperature for each room.

What Are The Ongoing Costs With Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the winter and summer periods, the annual running cost would be measured at $272.34.

Lowering Costs of Split Systems Operating Costs

It’s not difficult to reduce your running costs with the Split System. Based on the model you purchase, and the star rating will determine how much you’ll save per year. It is important to look beyond the initial cost and how you make use of your Split System can help as well.

Guide to Operating A Split System

• Set the thermostat to 24C and 26C to cool. Each degree less in summer increases the running cost by 10%..
• Utilize the economy setting when your split has one. You should also regularly maintain your air conditioner.
• Make sure that the sun’s heat is kept out by closing the curtains and exterior blinds in the morning. Close the doors and windows of areas being cooled when you have the split unit running.
• If the split system is switched off and its cooler outside, open the doors along with windows, allowing cool air in.
• Insulate your house to block heat out in summer and inside in winter.
• Dress appropriately for the weather.

Why Select Split Systems?

Air conditioning units mounted in wall are among the most commonly used residential air conditioning system, as they are affordable and easily to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout all seasons since it ensures an even temperature, helps save costs (less energy consumption) and creates a lot less sound when it is it is used. This is accomplished by managing the speed of the compressor more precisely.

Affordable

Wall-mounted split AC systems are the best economical option for a single room, apartment or small house since they are inexpensive to purchase (depending on the number of indoor units you’ll need) and do not require installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is located in, thus each room is able to have various temperature.

Air Quality

Many Split air conditioners have air filtering functions and humidity control that control the amount of dust and humidity that can be found in the room. This allows for sensitive customers (children, elderly, asthmatic or allergic customers) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to a single outdoor condenser that in turn provides you with satisfaction of having the ideal cooling system (in terms of output and physical limitations) for a specific room.

Split System FAQ

Is a split system the same thing as the air conditioning?

It is true that Split System can be described as an air conditioner system. There are various kinds of air conditioning systems. It include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All these systems operate on electricity & refrigerant under the same principles, however they are different in terms.

How long does it take to set up a split system air conditioner?

Generally speaking, a single split air conditioning system installation should last between 3 and 6 hours. The exact length of time may vary based on many factors such as below;

• Location and size of both outdoor and indoor unit
• The route of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Do I need to replace or fix my air conditioner?

In the majority of cases, if your air conditioner is at least 10 years of age and you notice evident issues with the A/C There is a high chance that it could be more affordable to replace than repair.

For help in making the right decision, it is best to contact the experts at ComfyHome to provide you with an honest opinion on the condition of your air conditioner.

What size split system air conditioning do I need?

A typical measure ratio would be to multiple the space by a factor of 0.15 in order to determine the power of the unit in kilowatt.

For a room area of 40 square metres, you’ll need a Split air conditioning system of 6 kW. A cooling unit of 2.5kW is ideal for 10-20 square meter room areas.

However, the amount of the Split system’s air conditioning requirements can also be affected by other factors like the room insulation, amount of people residing there and’ location.

To make an accurate determination of the necessary Split unit size, please call us for a more detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general an air conditioner is built to last 10-20 years on average. However, this is contingent upon a myriad of factors such as the brand of the A/C as well as the quality of the installation, routine service history etc…

It is vital to check the maintenance of Your Split System AC on a regular basis to extend its lifespan and improve effectiveness.

What is the best frequency to wash my air conditioner’s filter?

According to Daikin Australia, it is highly recommended that you clean your air conditioning filters every 2 weeks to increase the system’s efficiency and potentially reduce energy consumption by 5 to 15 percent.

St Kilda Gas Heating Services

• Gas Log Fire Service & Repairs St Kilda
• St Kilda
• Evaporative Cooling Repair St Kilda
• Brivis Ducted Gas Heating Servicing & Repair St Kilda
• Gas Appliance Servicing & Repair St Kilda
• Gas Heating Installation St Kilda
• Vulcan Ducted Gas Heating Servicing & Repair St Kilda
• Gas Hot Water System Installation & Repairs St Kilda
• Gas Heating St Kilda
• Gas Space Heater Repair St Kilda
• Gas Heating Service St Kilda
• Carbon Monoxide Testing St Kilda
• Ducted Gas Heating Servicing & Repair St Kilda
• Gas Heating Repairs St Kilda
• Braemar Ducted Gas Heating Servicing & Repair St Kilda

What Types of Systems We Service & Repair

Each model and brand of heating requires its own maintenance and operation; our experienced technicians are knowledgeable and expertise to provide the best service across all kinds of heaters including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in repairs and maintenance of heating systems, specialising in all styles and types of heating systems. We pride ourselves on a quick response time and commitment to excellence, efficiency , and reliability.

We are able to service and maintain the majority of major brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reputation & Reviews
• We’re friendly and personable.
• Experienced & Licenced Team
• Get a Free Quote and No Obligation

Our Promise To You

At Melbourne Ducted Gas Heating we understand the frustration of not having hot water, and it’s something we believe no one should suffer through. That’s why we give the highest priority on emergencies with hot water. Our plumbers are friendly and trustworthy We are able to assist you in all situations.

We take pride in our customer service and it is our conviction that the little things matter the most.

We pride ourselves on our great customer service, here’s why our customers appreciate us:

• We always show up when we tell you we will.
• Our experts will give you their number when they’re 30 minutes away.
• Price upfront, competitive and professional advice before we start the job.
• Always getting our hands clean after ourselves.

We at Melbourne Ducted Gas Heating offer emergency and maintenance services in electrical, plumbing and heating. If at any time you have questions about our services and what we offer.