Split System Installation Sandhurst

Split System Install in Sandhurst

There’s nothing more enjoyable than coming home from a scorching day of 40 degrees and turning on your split system air conditioning, and in a matter of minutes your house and your family are cool.

Split system air-conditioning provides this the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers to keep them running to their maximum it is essential to have them serviced and maintained to the highest standard by experienced professionals. Melbourne Ducted Gas Heating offers experienced technicians who know your split system air-conditioners inside and out. They specialize in all brands and models of these units offering you peace of mind that we are able to complete the task to a professional standard.

We offer a wide range of services, which include the following:

• Split System Installation Sandhurst
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and fully trained for all sorts of work. If you’re in search of split system installation Sandhurst services then contact Local Heating and Cooling Professionals Sandhurst today and talk to one of our knowledgeable team members.

How Do Split Systems Work?

The split systems of air conditioning have their name because of half the system (condenser) located outside the house , while the second half (fan coil) is inside. In cooling, warm air from inside the room is taken in by the fan coil, and then removed, resulting in cool air flowing back into the house. Reverse cycle allows your heat pump operate in reverse to provide heat in cold weather.

Systems for split air conditioners can be placed in rooms, zones or rooms linked by copper pipe with an outside unit (condenser). Systems with multi-head splits are able to be fitted in up to nine rooms using only one outdoor unit, as well as allowing individual temperature control of each room.

What Are The Ongoing Costs For Split Systems?

One of the brands we recommend of Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the winter and summer periods, the annual running cost is $272.34.

Reduced Split System Running Costs

It’s not hard to cut down on your operating costs with the Split System. Depending on the model that you purchaseand its star rating will determine how much you’ll save per year. Beyond the initial cost to the way you will use Your Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat between 24C and 26C for cooling. Any degree lower than that increases the running cost by around 10%.
• Choose the economy option if your split system has one and regularly service your air conditioning.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds during the day. Close windows and doors to areas that are cooling when the split system is running.
• If the split system is turned off and the cooler is outside, open doors as well as windows in order to let the cool air inside.
• Insulate your house to block summer heat out and the cold inside in winter.
• Dress to suit the weather conditions.

Why Select A Split System?

The wall mounted air conditioning system is the most frequently owned residential air conditioning system because they’re affordable and simple to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout all seasons since it ensures the temperature at a constant level, reduces costs (less energy use) and produces a lesser amount of noise when employed. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall-mounted divided AC system are best budget option for a small room, apartment or small house as they are comparatively inexpensive to buy (depending on how many indoor units you need) and they don’t require necessary duct work.

Independent Temperature Control

Each indoor unit is able to regulate the space it is situated in, thus each room can have a different temperature.

Air Quality

A lot of AC splits come with air filtering and humidity control functions that control the amount of dust and humidity in the space. This allows for sensitive customers (children or elderly, asthmatic or allergic users) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to a single outdoor condenser which provides the peace of mind that you have the most suitable cooling system (in terms of output and physical limitations) for a particular room.

Split System FAQ

Is a split system similar to the air conditioning?

Sure, Split System has an air-conditioning system. But, the different kinds of air conditioning systems. This which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate using refrigerant and electricity, based on the same principal but very different in terms of installation.

How long does it take to install a split-system air conditioner?

In general for a single split air conditioning system installation is expected to take 3-6 hours. The exact length of time could vary based on many factors such as below:

• Size and location of both the outdoor and indoor unit
• Copper pipes that are routed between the outdoor unit and the indoor unit
• Electrical connections from main switchboard up to the AC unit

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of situations in the event that your air conditioner is over > 10 years of age and you have obvious issues with your AC There is a high chance that it’s less expensive to replace it than to repair it.

In order to help you make the right decision, it is best to talk to the experts at ComfyHome to give you an honest assessment on the condition of your air conditioner.

What size of split system air conditioning will I require?

A common measurements ratio is multiply the area of the room by a ratio of 0.15 to get the needed power of the device in kilowatts.

For a room area of 40sqm, you should require a split system air conditioning unit of 6 kW. An air conditioning unit of 2.5kW is perfect for 10 -20 sqm room spaces.

However, the size of the Split system’s air conditioning can also be affected by other variables like the insulation of the room, the number of occupants and residents’ location.

For an accurate assessment of the necessary Split Unit size please contact us for a comprehensive analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general the air conditioner is constructed to last for 10-20 years, on average. But it depends on heaps of elements, such as the model of the AC, quality of the installation, the routine maintenance history and more…

It is important to service your split system air conditioner frequently for a longer life span and to increase efficiency.

What is the best frequency to wash my air conditioner’s filter?

Based on Daikin Australia, it is highly recommended that you wash your air conditioner’s filters every two weeks in order to boost the efficiency of the system and reduce your energy usage by 5 to 15 percent.

Sandhurst Gas Heating Services

• Vulcan Ducted Gas Heating Servicing & Repair Sandhurst
• Braemar Ducted Gas Heating Servicing & Repair Sandhurst
• Gas Heating Repairs Sandhurst
• Gas Heating Sandhurst
• Brivis Ducted Gas Heating Servicing & Repair Sandhurst
• Gas Log Fire Service & Repairs Sandhurst
• Gas Heating Service Sandhurst
• Carbon Monoxide Testing Sandhurst
• Sandhurst
• Evaporative Cooling Repair Sandhurst
• Gas Space Heater Repair Sandhurst
• Ducted Gas Heating Servicing & Repair Sandhurst
• Gas Heating Installation Sandhurst
• Gas Hot Water System Installation & Repairs Sandhurst
• Gas Appliance Servicing & Repair Sandhurst

What Types of Systems We Service & Repair

Each type and brand of heating comes with its own operation and maintenance Our highly skilled technicians have the insight and expertise to provide top-quality services to all systems of heating, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience with heating repair and maintenance, specialising in all styles and models of heating systems. We are proud of our quick response time and commitment to quality, efficiency and reliability.

We service and maintain the majority of top brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re personable and friendly
• Professionally trained and licensed team
• Get a Quote With No Costs

Our Promise To You

We at Melbourne Ducted Gas Heating we understand the inconvenience of not having any hot water. This is something we don’t think anyone should suffer through. This is why we put an emphasis on emergencies with hot water. Our experienced plumbers are courteous and reliable, without a doubt we can assist you in all situations.

We are proud of our customer service and it is our firm belief that the minor things matter most.

We take pride in our excellent customer service. Here’s why our clients appreciate us:

• We will always be there when we promise to be there.
• Our experts will give you their number when they’re thirty minutes away.
• Upfront competitive pricing and advice before we even begin the job.
• Always making sure we clean up after ourselves.

We at Melbourne Ducted Gas Heating offer emergency and maintenance services in electrical, plumbing and heating. If at any time you are unsure about our services and the products we can provide.