Split System Installation Glen Waverley

Split System Installation in Glen Waverley

There’s nothing better than arriving to your home on a hot 40-degree day, flipping on your split-system air conditioning and in just a couple of seconds, the house and family members are cool.

Split system air conditioning offers this versatility, which makes them tough to beat. But like all heaters and coolers, to ensure they are operating at their best they should be checked and maintained in a professional manner by qualified professionals. Melbourne Ducted Gas Heating offers experienced technicians that know your split system air-conditioners in and out. They specialise in all makes and models providing you with assurance that we can get the job done to a professional standard.

We offer a wide range of services, which include the following:

• Split System Installation Glen Waverley
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed to complete all types of jobs. If you’re looking for split system installation Glen Waverley services then contact Local Heating and Cooling Professionals Glen Waverley today and talk with one of our helpful team members.

How Do Split Systems Operate?

Split air conditioning systems have their name because half of this system (condenser) being located outside the house while the other half (fan coil) is installed inside. In cooling, hot air that is inside the room is brought in via the fan coil and is then removed, which results in cooling air returning to the home. The reverse cycle permits the heat pump to run in reverse to provide heating in cold weather.

Systems for split air conditioners can be fitted to individual rooms, areas or multiple rooms that are connected via copper pipes with an outside unit (condenser). Multiple-headed split-air conditioning units can be used for more than nine rooms, with only one outdoor unit, as well as allowing individual temperature control of each room.

What Are The Running Costs With Split Systems?

One of our recommended brands of Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular heating & cooling during the summer and winter months and the annual running costs would be $272.34.

Lowering the Split System Operating Costs

It’s not difficult to lower your running expenses by using the Split System. The model you buy, as well as its star rating, you will be able to determine how you’ll save each year. It is important to look beyond the initial cost to the way you utilize it Split System can help as well.

Tips For Using A Split System

• Set the thermostat between 24C and 26C to cool. Every degree lower in summer will increase your running costs by 10%..
• Use the economy setting if your split system has one and regularly service your air conditioning.
• Keep the sun’s heat away by closing curtains and external blinds in the morning. Close doors and windows to areas being cooled when you have the split unit running.
• When the split system has been switched off and its cooler outside, open the doors and windows to let the cool air inside.
• Insulate your property to help keep the heat out in summer and in the winter months.
• Wear clothes that are appropriate for the weather conditions.

Why Select A Split System?

The wall mounted air conditioning system is the most widely owned residential air conditioning system since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is the best option for greater comfort throughout the year as it maintains an even temperature, helps save costs (less consumption of energy) and produces a lesser amount of sound when it is employed. This is achieved by managing the speed of the compressor more precisely.

Affordable

Wall-mounted wall mounted split AC systems are the best affordable option for a one room or apartment since they are inexpensive to buy (depending on the amount of indoor units you’ll need) and do not require installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the area it is installed in, thus each room may have distinct temperature.

Air Quality

A lot of HVAC systems that are split have air filtering and humidity control features which control the amount dust and humidity in a room. This provides those with sensitive skin (children and elderly, asthmatic or allergic people) peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser which gives you satisfaction of having the best cooling system (in terms of output and physical limitations) for a specific room.

Split System FAQ

Is a split system similar to one would expect from an air conditioner?

Absolutely, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. These which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated Air Conditioner

All these systems operate with refrigerant and electricity under the same principal but very different in terms of installation.

How long will it take to install a split-system air conditioner?

In general an individual split system air conditioning installation can take between 3-6 hours. The exact length of time could vary based on various factors like below:

• Size and location of both indoor and outdoor unit
• The copper pipes are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboard to the A/C unit

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of cases in the event that your A/C is more than 10 years old and there are apparent issues with your air conditioner There is a high likelihood that it is cheaper to replace rather than fix.

To help you make the right decision for your needs, consult with the staff at ComfyHome to give you an honest and accurate assessment of the state of your air conditioner.

What size of split system air conditioner will I require?

A standard measurement ratio is to multiply the space by a factor of 0.15 to calculate the necessary power of the device in kilowatts.

If you have a room size of 40sqm, you should require a split air conditioning system of 6 kW. A unit that can cool the air at 2.5kW is the ideal size for 10-20 sqm rooms areas.

The size of the Split system air conditioning required is also dependent on other factors such as the room insulation, amount of people residing there and’ position.

To make an accurate determination of the needed Split dimension, please contact us for a detailed analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general, an air conditioner is designed to last between 10 and 20 years, on an average. But it depends on heaps of things like the manufacturer of the air conditioner, quality of the installation, the routine maintenance history etc…

It is important to service Your Split System AC regularly to extend its life and increase efficiency.

Do I need to wash my air conditioner’s air filter?

Based on Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every two weeks in order to boost the efficiency of your system and possibly reduce your energy consumption by 5%-15 percentage.

Glen Waverley Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Glen Waverley
• Gas Heating Repairs Glen Waverley
• Ducted Gas Heating Servicing & Repair Glen Waverley
• Gas Appliance Servicing & Repair Glen Waverley
• Gas Space Heater Repair Glen Waverley
• Carbon Monoxide Testing Glen Waverley
• Gas Heating Glen Waverley
• Brivis Ducted Gas Heating Servicing & Repair Glen Waverley
• Gas Heating Installation Glen Waverley
• Gas Log Fire Service & Repairs Glen Waverley
• Gas Hot Water System Installation & Repairs Glen Waverley
• Gas Heating Service Glen Waverley
• Glen Waverley
• Evaporative Cooling Repair Glen Waverley
• Vulcan Ducted Gas Heating Servicing & Repair Glen Waverley

What Types of Systems We Service & Repair

Every brand and type of heating comes with its individual operation and maintenance requirements; our experienced technicians have the knowledge and expertise to provide top-quality services for all heating systems including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in the field of heating repairs and maintenance, specialising in all styles and brands of heating equipment. We take pride in a rapid response time and dedication to excellence, efficiency and reliability.

We are able to service and maintain the majority of leading brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Request a Quote with No obligation

Our Promise To You

At Melbourne Ducted Gas Heating we understand the difficulty of not having hot water. It’s a situation we do not believe anyone should have to experience. This is the reason we place such a high priority on hot water emergencies. All of our plumbers are trustworthy and friendly and without doubt, we can assist you in any circumstance.

We pride ourselves on our customer service and it is our conviction that the little things matter the most.

We pride ourselves on our outstanding customer service. and here’s the reason our customers appreciate us:

• We always arrive when we promise to be there.
• Our staff will give you the number to call them when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we start the job.
• Always getting our hands clean after us.

Our company Melbourne Ducted Gas Heating offer emergency and maintenance services for plumbing, electrical, and heating. If you are unsure about our services or what we can provide.