Split System Installation Frankston

Split System Install in Frankston

There’s nothing better than arriving home to a day of 40 degrees and switching on your split system air conditioning, and in a matter of minutes , your home and your family is cool.

Split system air conditioning offers this versatility, which makes them tough to beat. But like all heaters and coolers, to ensure they are operating to their maximum they must be checked and maintained at a high level by skilled professionals. Melbourne Ducted Gas Heating offers experienced technicians who are familiar with split system air-conditioners from top to bottom. They specialise in all makes and models of these units and give you confidence that we are able to complete the task to professional standards.

We provide a range of services that include the following:

• Split System Installation Frankston
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and certified to complete all types of tasks. If you’re looking for split system installation Frankston services then contact Local Heating and Cooling Professionals Frankston today and talk with one of our friendly team members.

How Do Split Systems Function?

The split systems of air conditioning have their name due to half it (condenser) is located outside of the house while the other half (fan coil) is located inside. When cooling, the hot air that is inside the room is drawn in by the fan coil, and then taken out, resulting into cool air flowing back into the home. The reverse cycle permits heating pumps to run in reverse to provide heating during colder days.

Air conditioning split systems can be fitted to individual rooms, zones or rooms connected by copper piping connecting to the outdoor unit (condenser). Multiple-headed split-air conditioning units are able to be fitted in as many as nine rooms and only one outdoor unit permitting separate temperature control for each room.

What Are The Ongoing Costs For Split Systems?

One of the brands we recommend to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating during the summer and winter time The annual operating cost will be $272.34.

Reduced Costs of Split Systems Running Costs

It’s not hard to reduce your running costs by using a Split System. Depending on the model you purchaseand its star rating will determine how you’ll save each year. It is important to look beyond the initial cost and how you will use the Split System can help as well.

Tips For Using A Split System

• Set the thermostat between 24C and 26C for cooling. Every degree lower in summer increases the running cost by about 10%..
• Utilize the economy setting in the event that your split system is equipped with one and regularly service your air cooling system.
• Keep the sun’s heat away by closing the curtains and exterior blinds during the day. Close all doors and windows in areas that are cooled when it is split operating.
• If the split system is shut off and the cooler outside, you can open doors and windows to let cool air in.
• Insulate your home to keep the heat out in summer and in during winter.
• Wear clothes that are appropriate for the weather.

Why Choose A Split System?

The wall mounted air conditioning system is the most frequently owned by homeowners who own a residential air conditioning system because they’re affordable and simple to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout all seasons since it ensures the temperature constant, cuts costs (less consumption of energy) and produces relatively less noise when used. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall-mounted divided AC system are most affordable option for a one room, apartment or small house since they are inexpensive to buy (depending on how many indoor units you require) and there is no installation of ducts.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is situated in, which means that each room can have a different temperature.

Air Quality

A lot of AC splits feature air filtering and humidity control functions which regulate the amount of dust and humidity in the space. This provides those with sensitive skin (children and elderly, asthmatic or allergic customers) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to one outdoor condenser, which in turn gives you the peace of mind that you have the ideal air conditioner (in terms of output and physical constraints) to a specific space.

Split System FAQ

Is a split system the same as the air conditioning?

Yes, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. These include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates on electricity & refrigerant under the same principal but very different in terms of installation.

How long does it take to set up a split system air conditioner?

In general for a single split air conditioning system installation can be completed in 3-6 hours. The exact length of time will depend on many factors such as below;

• Location and size of both indoor and outdoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from the main switchboard to the A/C unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In most situation in the event that your A/C is more than 10 years and you have obvious issues with your AC there’s a great likelihood that it is less expensive to replace it than to repair it.

For help in making the best decision It is recommended to consult with the staff at ComfyHome to give you an honest assessment on the state of your air conditioner.

What size of split system air conditioning do I need?

A common measure ratio would be to multiply the area of the room by a ratio of 0.15 in order to determine the power of the unit in kilowatt.

For a space of 40sqm, you should require a split system air conditioning unit that is 6 kW. A cooling unit of 2.5kW is suitable for 10-20 square meter room areas.

However, the size of the Split system air conditioning required is also affected by other factors like how well the insulation is in place, the number of occupants and residents’ place of residence.

To get an accurate estimate of the Split dimension, please call us for a more detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general an air conditioner is built to last from 10-20 years on an average. But it depends on heaps of factors such as the brand of the A/C it is installed on, the quality of its installation, routine maintenance history etc…

It is important to service the Split System air conditioner frequently to extend its life and increase efficiency.

What is the best frequency to wash my air conditioner’s filter?

In accordance with Daikin Australia, it is strongly recommended to clean your air conditioning filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy consumption by 5%-15 percentage.

Frankston Gas Heating Services

• Gas Heating Frankston
• Braemar Ducted Gas Heating Servicing & Repair Frankston
• Carbon Monoxide Testing Frankston
• Brivis Ducted Gas Heating Servicing & Repair Frankston
• Evaporative Cooling Repair Frankston
• Ducted Gas Heating Servicing & Repair Frankston
• Gas Heating Service Frankston
• Gas Hot Water System Installation & Repairs Frankston
• Vulcan Ducted Gas Heating Servicing & Repair Frankston
• Gas Appliance Servicing & Repair Frankston
• Gas Space Heater Repair Frankston
• Gas Heating Installation Frankston
• Gas Log Fire Service & Repairs Frankston
• Gas Heating Repairs Frankston
• Frankston

What Types of Systems We Service & Repair

Each model and brand of heating system has its own maintenance and operation Our experienced technicians are knowledgeable and experience to offer excellent services for all heating systems, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience with heating repair and maintenance that specialize in all kinds and brands of heating equipment. We pride ourselves on having a rapid response time as well as a commitment to quality, efficiency and reliability.

We can service and maintain the important brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Professional Quality Workmanship Assurance
• Excellent Reviews & Reputation
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Get a Free Quote and No Costs

Our Promise To You

We at Melbourne Ducted Gas Heating we understand the difficulty of not having hot water, and it’s something that we would never want anyone to have to experience. This is why we put an emphasis on emergencies involving hot water. All of our experienced plumbers are trustworthy and friendly and without doubt, we are able to assist you in any situation.

We take pride in our service to customers and it is our firm belief that the minor things matter most.

We are proud of our exceptional customer service. Here’s why our clients love us:

• We always show up when promise to be there.
• Our experts will give you a call when they are 30 minutes away.
• Competitive pricing upfront and expert advice before we start the job.
• Always making sure we clean up after ourselves.

Our company Melbourne Ducted Gas Heating offer emergency and maintenance services for electrical, plumbing and heating. If you are unsure about our services or what we offer.